Show simple item record

dc.contributor.authorChen, Yun
dc.contributor.authorLi, Huaizhong
dc.contributor.authorWang, Jun
dc.contributor.editorZhang, YF
dc.contributor.editorButler, DL
dc.contributor.editorWang, J
dc.contributor.editorLi, XP
dc.contributor.editorYui, A
dc.contributor.editorZhou, L
dc.date.accessioned2018-06-29T02:00:59Z
dc.date.available2018-06-29T02:00:59Z
dc.date.issued2012
dc.identifier.issn1022-6680
dc.identifier.doi10.4028/www.scientific.net/AMR.565.454
dc.identifier.urihttp://hdl.handle.net/10072/172050
dc.description.abstractTitanium alloys are difficult-to-cut materials. This paper presents an experimental study of the effects of different cutting conditions and tool wear on cutting forces in dry milling Ti6Al4V with coated carbide inserts. The experimental results show that the peak forces increase with the increase in the feed rate and depth of cut. With the cutting speed increment in the range from 50 m/min to 150 m/min the peak forces decrease, while at further higher cutting speeds investigated peak forces increase. The decrease of the peak forces is due to thermal softening of the workpiece material and the increase is because of the strain hardening rate of Ti6Al4V. The tool wear experiment reveals that the major tool wear mechanism is the flank wear. The variations of the peak forces are caused by both the tool wear propagation and the thermal effects.
dc.description.peerreviewedYes
dc.languageEnglish
dc.language.isoeng
dc.publisherScientific.Net
dc.relation.ispartofpagefrom454
dc.relation.ispartofpageto459
dc.relation.ispartofjournalAdvanced Materials Research
dc.relation.ispartofvolume565
dc.subject.fieldofresearchEngineering
dc.subject.fieldofresearchMaterials engineering not elsewhere classified
dc.subject.fieldofresearchcode40
dc.subject.fieldofresearchcode401699
dc.titleCutting forces and tool wear in dry milling of Ti6Al4V
dc.typeJournal article
dc.type.descriptionC1 - Articles
dc.type.codeC - Journal Articles
gro.hasfulltextNo Full Text
gro.griffith.authorLi, Huaizhong


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

  • Journal articles
    Contains articles published by Griffith authors in scholarly journals.

Show simple item record