Corrosion of Zn under fine size aerosols and droplets using inkjet printer deposition and optical profilometry quantification
MetadataShow full item record
In this study, corrosion of Zn surfaces caused by fine size acidified droplets (diameter ∼0.1–5 μm) was quantified. Fine size droplets of various chemistries were deposited using an unmodified inkjet printer and damage was quantified in terms of volume loss (ΔV) as determined through optical profilometry (OP). SEM–EDS and FIB milling were used to characterise corrosion products and perform cross-sectional analysis of surface oxides. Results show synergistic interactions between chloride concentration and the types of acids used for acidification. Corrosion under fine size droplets was found to be dependent on the initial volume of aerosols, oxygen diffusion, surface area to volume ratio and likely the microstructural features of the underlying metal.
Materials Engineering not elsewhere classified