Optimal Design and analysis of Faraday shield used in high-frequency coaxial transformer

View/ Open
Author(s)
Yang, Xiaoguang
Lu, Junwei
Griffith University Author(s)
Year published
2008
Metadata
Show full item recordAbstract
In order to suppress high frequency (HF) noise, a Faraday shield was used in a HF isolation coaxial transformer design. The effect of the Faraday shield on current and flux distribution and the power loss compared with the no shield case is numerically analyzed for different winding arrangements under both open circuit and short circuit conditions. An optimized shield thickness and its position between the primary and secondary windings are determined by taking into account the coil configurations and load conditions. The intra- and inter- capacitances of a HF transformer with a shield or no shield case were also numerically ...
View more >In order to suppress high frequency (HF) noise, a Faraday shield was used in a HF isolation coaxial transformer design. The effect of the Faraday shield on current and flux distribution and the power loss compared with the no shield case is numerically analyzed for different winding arrangements under both open circuit and short circuit conditions. An optimized shield thickness and its position between the primary and secondary windings are determined by taking into account the coil configurations and load conditions. The intra- and inter- capacitances of a HF transformer with a shield or no shield case were also numerically analyzed. The calculated inter - capacitance is in good agreement with the experimental result.
View less >
View more >In order to suppress high frequency (HF) noise, a Faraday shield was used in a HF isolation coaxial transformer design. The effect of the Faraday shield on current and flux distribution and the power loss compared with the no shield case is numerically analyzed for different winding arrangements under both open circuit and short circuit conditions. An optimized shield thickness and its position between the primary and secondary windings are determined by taking into account the coil configurations and load conditions. The intra- and inter- capacitances of a HF transformer with a shield or no shield case were also numerically analyzed. The calculated inter - capacitance is in good agreement with the experimental result.
View less >
Conference Title
IEEE INTERMAG2008
Publisher URI
Copyright Statement
© The Author(s) 2008. For information about this conference please refer to the publisher’s website or contact the author[s]. The attached file is posted here with permission of the copyright owner[s] for your personal use only. No further distribution permitted.
Subject
Electrical and Electronic Engineering not elsewhere classified