Show simple item record

dc.contributor.authorBarbosa, A. Q.
dc.contributor.authorda Silva, L. F. M.
dc.contributor.authorAbenojar, J.
dc.contributor.authorFigueiredo, M.
dc.contributor.authorOechsner, Andreas
dc.date.accessioned2017-07-13T02:01:20Z
dc.date.available2017-07-13T02:01:20Z
dc.date.issued2017
dc.identifier.issn1879-1069
dc.identifier.doi10.1016/j.compositesb.2016.10.072
dc.identifier.urihttp://hdl.handle.net/10072/341739
dc.description.abstractStructural adhesives are increasingly being used for new applications, replacing conventional bonding methods. Epoxy resins are the most common structural adhesives used due to their suitable mechanical, thermal and chemical properties, as well for their low ductility and low toughness. Several researchers, have in the past decades, found it necessary to reverse these properties and find new ways to increase the toughness of these adhesives. There are many processes depicted in the literature on how to increase the toughness of brittle adhesives, the use of rubber particles being one of the most common. The inclusion of particles (nano or micro) is a successful method to improve toughness of structural adhesives. In the present study, natural micro particles of cork are used with the objective of increasing the toughness of a brittle epoxy adhesive. The concept is for the cork particles to act like as a crack stopper leading to more energy absorption. The influence of the cork particle size, amount and the presence of a surface treatment were studied. Cork particles ranging from 38 to 53 and 125 to 250 μm were mixed into adhesive Araldite 2020. The amount of cork in the adhesive varied between 0.25 and 1% in volume. The toughness of the adhesive was assessed through fracture tests, using three-point bending specimens. A Taguchi design experiments was used to understand the influence of each parameter under study (amount, size and presence of surface treatment) and the interaction between them. With this research it was possible to conclude that cork can improve toughness and cork amount, size and the use of plasma surface treatment have influence on the mechanical properties.
dc.description.peerreviewedYes
dc.languageEnglish
dc.language.isoeng
dc.publisherElsevier
dc.relation.ispartofpagefrom299
dc.relation.ispartofpageto310
dc.relation.ispartofjournalComposites Part B: Engineering
dc.relation.ispartofvolume114
dc.subject.fieldofresearchPolymers and Plastics
dc.subject.fieldofresearchEngineering
dc.subject.fieldofresearchcode091209
dc.subject.fieldofresearchcode09
dc.titleToughness of a brittle epoxy resin reinforced with micro cork particles: Effect of size, amount and surface treatment
dc.typeJournal article
dc.type.descriptionC1 - Articles
dc.type.codeC - Journal Articles
gro.hasfulltextNo Full Text
gro.griffith.authorOechsner, Andreas


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

  • Journal articles
    Contains articles published by Griffith authors in scholarly journals.

Show simple item record