Show simple item record

dc.contributor.authorHo, Nhat Minh
dc.contributor.authorDoh, Jeung-Hwan
dc.date.accessioned2018-05-13T23:08:53Z
dc.date.available2018-05-13T23:08:53Z
dc.date.issued2017
dc.identifier.urihttp://hdl.handle.net/10072/375034
dc.description.abstractAxially loaded reinforced concrete walls can be constructed with various support conditions. Walls can be designed using simplified design methods given in codes such as the Australian Concrete Standard (AS3600-09), the Eurocode 2 (EC2-04) and the American Concrete Institute Code (ACI318-14). There is little research published on the behaviour of three-side restrained (TW3S) walls. As such, an experimental programme was undertaken on three TW3S walls. The dimensions of the walls were selected by incorporating the provision for varying values of slenderness ratio and aspect ratio. All panels were subjected to eccentric axial loadings and tested to failure. The design equations specified in the aforementioned codes were found to be inadequate in predicting the failure load for TW3S walls of high slenderness ratios. In addition, an instability analysis incorporated into a computer program called WASTABT, to establish the behaviour of TW3S walls, is also presented. The outputs from the WASTABT program were compared to test results to verify the material and geometric modelling techniques adopted. Finally, this computational approach was used in conjunction with a probabilistic, semi-empirical design procedure specified in the Eurocode 0 (EC0-02), leading to more realistic design capacities of slender TW3S walls.en_US
dc.description.peerreviewedYesen_US
dc.languageEnglishen_US
dc.publisherTongji Universityen_US
dc.publisher.placeChinaen_US
dc.publisher.urihttps://eventegg.com/easec/en_US
dc.relation.ispartofconferencenameEASEC-15en_US
dc.relation.ispartofconferencetitle15th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-15)en_US
dc.relation.ispartofdatefrom2017-10-11
dc.relation.ispartofdateto2017-10-13
dc.relation.ispartoflocationXi⡮, Chinaen_US
dc.subject.fieldofresearchStructural Engineeringen_US
dc.subject.fieldofresearchcode090506en_US
dc.titleDesign assisted by testing applied to the determination of the design resistance of RC walls restrained on three sidesen_US
dc.typeConference outputen_US
dc.type.descriptionE1 - Conference Publications (HERDC)en_US
dc.type.codeE - Conference Publicationsen_US
gro.facultyGriffith Sciences, School of Engineering and Built Environmenten_US
gro.hasfulltextNo Full Text
gro.griffith.authorHo, Nhat Minh M.
gro.griffith.authorDoh, Jeung-Hwan


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

  • Conference outputs
    Contains papers delivered by Griffith authors at national and international conferences.

Show simple item record