Suitability of Sarawak and Gladstone Fly Ash to Produce Geopolymers: A Physical, Chemical, Mechanical, Mineralogical and Microstructural Analysis
View/ Open
File version
Accepted Manuscript (AM)
Author(s)
Leong, Hsiao Yun
Ong, Dominic Ek Leong
Sanjayan, Jay G
Nazari, Ali
Griffith University Author(s)
Year published
2016
Metadata
Show full item recordAbstract
Two types of fly ash sourced from Sarawak, Malaysia and Gladstone, Australia reflect differences in chemical compositions, mineral phase and particle size distributions. In this paper, the Sarawak fly ash was used to produce geopolymer in comparison to the well-developed Gladstone fly ash-based geopolymer. Characteristics of fly ash and mixtures proportions affecting compressive strength of the geopolymers were investigated. It is found that the variations of both fly ash types on particle size distributions, chemical compositions, morphology properties and amorphous phase correspond to the compressive strength. The results ...
View more >Two types of fly ash sourced from Sarawak, Malaysia and Gladstone, Australia reflect differences in chemical compositions, mineral phase and particle size distributions. In this paper, the Sarawak fly ash was used to produce geopolymer in comparison to the well-developed Gladstone fly ash-based geopolymer. Characteristics of fly ash and mixtures proportions affecting compressive strength of the geopolymers were investigated. It is found that the variations of both fly ash types on particle size distributions, chemical compositions, morphology properties and amorphous phase correspond to the compressive strength. The results obtained show that after 7 days, geopolymer using Sarawak fly ash has lower compressive strength of about 55 MPa than geopolymer using Gladstone fly ash with strength of about 62 MPa. In comparison with Gladstone fly ash-based geopolymer, it showed that Sarawak fly ash-based geopolymer can be a potential construction material. Moreover, the production of Sarawak fly ash-based geopolymer aids to widen the application of Sarawak fly ash from being treated as industrial waste consequently discharging into the ash pond.
View less >
View more >Two types of fly ash sourced from Sarawak, Malaysia and Gladstone, Australia reflect differences in chemical compositions, mineral phase and particle size distributions. In this paper, the Sarawak fly ash was used to produce geopolymer in comparison to the well-developed Gladstone fly ash-based geopolymer. Characteristics of fly ash and mixtures proportions affecting compressive strength of the geopolymers were investigated. It is found that the variations of both fly ash types on particle size distributions, chemical compositions, morphology properties and amorphous phase correspond to the compressive strength. The results obtained show that after 7 days, geopolymer using Sarawak fly ash has lower compressive strength of about 55 MPa than geopolymer using Gladstone fly ash with strength of about 62 MPa. In comparison with Gladstone fly ash-based geopolymer, it showed that Sarawak fly ash-based geopolymer can be a potential construction material. Moreover, the production of Sarawak fly ash-based geopolymer aids to widen the application of Sarawak fly ash from being treated as industrial waste consequently discharging into the ash pond.
View less >
Journal Title
Ceramics International
Volume
42
Copyright Statement
© 2016 Elsevier Ltd and Techna S.r.l. Published by Elsevier Ltd. Licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Licence (http://creativecommons.org/licenses/by-nc-nd/4.0/) which permits unrestricted, non-commercial use, distribution and reproduction in any medium, providing that the work is properly cited.
Subject
Chemical sciences
Engineering
Civil geotechnical engineering
Creative arts and writing