An intelligent chatter detection method based on EEMD and feature selection with multi-channel vibration signals

View/ Open
File version
Accepted Manuscript (AM)
Author(s)
Chen, Yun
Li, Huaizhong
Hou, Liang
Wang, Jun
Bu, Xiangjian
Griffith University Author(s)
Year published
2018
Metadata
Show full item recordAbstract
Chatter detection in metal machining is important to ensure good surface quality and avoid damage to the machine tool and workpiece. This paper presents an intelligent chatter detection method in a multi-channel monitoring system comprising vibration signals in three orthogonal directions. The method comprises three main steps: signal processing, feature extraction and selection, and classification. The ensemble empirical mode decomposition (EEMD) is used to decompose the raw signals into a set of intrinsic mode functions (IMFs) that represent different frequency bands. Features extracted from IMFs are ranked using the Fisher ...
View more >Chatter detection in metal machining is important to ensure good surface quality and avoid damage to the machine tool and workpiece. This paper presents an intelligent chatter detection method in a multi-channel monitoring system comprising vibration signals in three orthogonal directions. The method comprises three main steps: signal processing, feature extraction and selection, and classification. The ensemble empirical mode decomposition (EEMD) is used to decompose the raw signals into a set of intrinsic mode functions (IMFs) that represent different frequency bands. Features extracted from IMFs are ranked using the Fisher discriminant ratio (FDR) to identify the informative IMFs, and those features with higher FDRs are selected and presented to a support vector machine for classification. Single-channel strategies and multi-channel strategies are compared in low immersion milling of titanium alloy Ti6Al4V. The results demonstrate that the two-channel (Ay, Az) strategies based on signal processing and feature ranking/selection give the best performance in classification of the stable and unstable tests.
View less >
View more >Chatter detection in metal machining is important to ensure good surface quality and avoid damage to the machine tool and workpiece. This paper presents an intelligent chatter detection method in a multi-channel monitoring system comprising vibration signals in three orthogonal directions. The method comprises three main steps: signal processing, feature extraction and selection, and classification. The ensemble empirical mode decomposition (EEMD) is used to decompose the raw signals into a set of intrinsic mode functions (IMFs) that represent different frequency bands. Features extracted from IMFs are ranked using the Fisher discriminant ratio (FDR) to identify the informative IMFs, and those features with higher FDRs are selected and presented to a support vector machine for classification. Single-channel strategies and multi-channel strategies are compared in low immersion milling of titanium alloy Ti6Al4V. The results demonstrate that the two-channel (Ay, Az) strategies based on signal processing and feature ranking/selection give the best performance in classification of the stable and unstable tests.
View less >
Journal Title
Measurement
Volume
127
Copyright Statement
© 2018 Elsevier. Licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Licence (http://creativecommons.org/licenses/by-nc-nd/4.0/) which permits unrestricted, non-commercial use, distribution and reproduction in any medium, providing that the work is properly cited.
Subject
Artificial intelligence
Applied mathematics
Mechanical engineering
Mechanical engineering not elsewhere classified