Show simple item record

dc.contributor.authorIslam, Md Ashrafulen_US
dc.contributor.authorMonde, Masanorien_US
dc.contributor.authorWoodfield, Peter Lloyden_US
dc.contributor.authorMitsutake, Yuichien_US
dc.date.accessioned2017-05-03T15:47:54Z
dc.date.available2017-05-03T15:47:54Z
dc.date.issued2008en_US
dc.date.modified2011-05-03T04:47:44Z
dc.identifier.issn00179310en_US
dc.identifier.doi10.1016/j.ijheatmasstransfer.2007.01.059en_AU
dc.identifier.urihttp://hdl.handle.net/10072/38552
dc.description.abstractExperiments were conducted to understand the phenomena that happen just after a subcooled free-surface circular water jet impinges on a high temperature surface. A 2 mm-water-jet of 5-80 K subcooling and 3-15 m/s velocity was impinged on the flat surface of a cylindrical steel/brass block that was preheated to 500-600 î The transient temperature data were recorded and used to predict the surface temperature by an inverse heat conduction technique. A high-speed video camera was also employed to capture the flow condition. It is found that for a certain period of time the surface temperature remains well above the thermodynamic limiting temperature that allows stable solid-liquid contact. What happens during this period and what makes the surface temperature drop to the limiting temperature are important questions whose possible answers are given in this article. The cooling curves at the center of the impinging surface for different experimental conditions are also explained in relation with the limiting temperature and three characteristic regions having different types of flow patterns are identified.en_US
dc.description.peerreviewedYesen_US
dc.description.publicationstatusYesen_AU
dc.languageEnglishen_US
dc.language.isoen_AU
dc.publisherPergamonen_US
dc.publisher.placeUnited Kingdomen_US
dc.relation.ispartofstudentpublicationNen_AU
dc.relation.ispartofpagefrom1226en_US
dc.relation.ispartofpageto1237en_US
dc.relation.ispartofissue5-6en_US
dc.relation.ispartofjournalInternational Journal of Heat and Mass Transferen_US
dc.relation.ispartofvolume51en_US
dc.rights.retentionYen_AU
dc.subject.fieldofresearchMechanical Engineering not elsewhere classifieden_US
dc.subject.fieldofresearchcode091399en_US
dc.titleJet impingement quenching phenomena for hot surfaces well above the limiting temperature for solid-liquid contacten_US
dc.typeJournal articleen_US
dc.type.descriptionC1 - Peer Reviewed (HERDC)en_US
dc.type.codeC - Journal Articlesen_US
gro.date.issued2008
gro.hasfulltextNo Full Text


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

  • Journal articles
    Contains articles published by Griffith authors in scholarly journals.

Show simple item record