dc.contributor.author | Cuong, Nguyen Nhu | |
dc.contributor.author | Luan, Le Van | |
dc.contributor.author | An, Nguyen Ngoc | |
dc.contributor.author | Van, Thanh Dau | |
dc.contributor.author | Tung, Thanh Bui | |
dc.contributor.author | Trinh, Chu Duc | |
dc.date.accessioned | 2019-07-03T22:43:36Z | |
dc.date.available | 2019-07-03T22:43:36Z | |
dc.date.issued | 2018 | |
dc.identifier.issn | 1475-7435 | |
dc.identifier.doi | 10.1504/IJNT.2018.099938 | |
dc.identifier.uri | http://hdl.handle.net/10072/385931 | |
dc.description.abstract | A valveless microfluidic pump fabricated by additive fabrication technology is presented. Nozzle/diffuser structures are used to direct the flow of liquid currents inside the PZT-based micropump. A unique design using the collision of two inlet currents helps reduce the back-flow during the suction phase and promotes mixing ability. The micropump is simulated and a positive flow rate is observed at the outlet. The performance of the pump is further investigated at different driving frequencies and voltages. Simulation study on the nozzle/diffuser helps determine an efficient configuration of the nozzle/diffuser of 6° opening angle. The proposed micropump is suitable for low-cost disposable applications and is capable of delivering a controlled amount of liquid. | |
dc.description.peerreviewed | Yes | |
dc.language | English | |
dc.publisher | INDERSCIENCE ENTERPRISES LTD | |
dc.relation.ispartofconferencename | 6th International Workshop on Nanotechnology and Applications (IWNA) | |
dc.relation.ispartofconferencetitle | INTERNATIONAL JOURNAL OF NANOTECHNOLOGY | |
dc.relation.ispartofdatefrom | 2017-11-08 | |
dc.relation.ispartofdateto | 2017-11-11 | |
dc.relation.ispartoflocation | Phan Thiet, VIETNAM | |
dc.relation.ispartofpagefrom | 1010 | |
dc.relation.ispartofpageto | 1023 | |
dc.relation.ispartofissue | 11-12 | |
dc.relation.ispartofvolume | 15 | |
dc.subject.fieldofresearch | Chemical engineering | |
dc.subject.fieldofresearch | Nanotechnology | |
dc.subject.fieldofresearchcode | 4004 | |
dc.subject.fieldofresearchcode | 4018 | |
dc.title | A valveless micropump based on additive fabrication technology | |
dc.type | Journal article | |
dc.type.description | C1 - Articles | |
dc.type.code | E - Conference Publications | |
dc.description.version | Accepted Manuscript (AM) | |
gro.rights.copyright | © 2018 Inderscience Publishers. This is the author-manuscript version of this paper. Reproduced in accordance with the copyright policy of the publisher. Please refer to the journal website for access to the definitive, published version. | |
gro.hasfulltext | Full Text | |
gro.griffith.author | Dau, Van | |