Show simple item record

dc.contributor.authorTarsha Kurdi, F
dc.contributor.authorAwrangjeb, M
dc.contributor.authorMunir, N
dc.date.accessioned2020-03-02T01:14:33Z
dc.date.available2020-03-02T01:14:33Z
dc.date.issued2019
dc.identifier.issn2194-9042
dc.identifier.doi10.5194/isprs-annals-IV-4-W8-107-2019
dc.identifier.urihttp://hdl.handle.net/10072/392025
dc.description.abstractDespite the large quantity of researches and publications achieved during the last three decades about 3D building modelling by using Lidar data, the question of inner roof plane boundaries modelling needs to be more extracted in detail. This paper focuses on detection and 2D modelling of building inner roof plane boundaries. This operation presents an imperative junction between roof planes detection and 3D building model generation. Therefore, it presents key procedure in data driven approaches. For achieving this purpose, roof boundaries are classified in four categories: outer building boundaries, inner roof plane boundaries, roof details (chimneys and windows) boundaries and boundaries related to non-detectable roof details. This paper concentrates on detection and modelling of inner roof plane boundaries and roof details (chimneys and windows) boundaries. Moreover, it details the modelling procedures step by step that is envisaged rarely in the literature. The proposed approach starts by analysing the adjacency relationship between roof planes. Then, the inner roof plane boundaries are detected. Finally, the junction relationships between boundaries are analysed before detecting the roof vertices. Once the 2D roof model is calculated, the visual deformations in addition to modelling accuracy are discussed.
dc.description.peerreviewedYes
dc.languageEnglish
dc.language.isoeng
dc.publisherInternational Society for Photogrammetry and Remote Sensing (ISPRS)
dc.relation.ispartofconferencename14th 3D GeoInfo Conference 2019
dc.relation.ispartofconferencetitleISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
dc.relation.ispartofdatefrom2019-09-24
dc.relation.ispartofdateto2019-09-27
dc.relation.ispartoflocationSingapore, Singapore
dc.relation.ispartofpagefrom107
dc.relation.ispartofpageto114
dc.relation.ispartofissue4/W8
dc.relation.ispartofvolume4
dc.subject.fieldofresearchGeomatic engineering
dc.subject.fieldofresearchcode4013
dc.titleAutomatic 2D modelling of inner roof planes boundaries starting from LiDAR data
dc.typeConference output
dc.type.descriptionE1 - Conferences
dcterms.bibliographicCitationTarsha Kurdi, F; Awrangjeb, M; Munir, N, Automatic 2D modelling of inner roof planes boundaries starting from LiDAR data, ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 2019, 4 (4/W8), pp. 107-114
dcterms.licensehttp://creativecommons.org/licenses/by/4.0/
dc.date.updated2020-02-28T05:53:04Z
dc.description.versionVersion of Record (VoR)
gro.rights.copyright© The Author(s) 2019. This is an Open Access article distributed under the terms of the Creative Commons Attribution 4.0 International License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
gro.hasfulltextFull Text
gro.griffith.authorAwrangjeb, Mohammad


Files in this item

This item appears in the following Collection(s)

  • Conference outputs
    Contains papers delivered by Griffith authors at national and international conferences.

Show simple item record