Show simple item record

dc.contributor.authorKumar, Aswath
dc.contributor.authorEspinosa, Hugo G
dc.contributor.authorWorsey, Matthew
dc.contributor.authorThiel, David V
dc.date.accessioned2020-06-17T22:20:36Z
dc.date.available2020-06-17T22:20:36Z
dc.date.issued2020
dc.identifier.issn2504-3900
dc.identifier.doi10.3390/proceedings2020049011
dc.identifier.urihttp://hdl.handle.net/10072/394691
dc.description.abstractThe ability to measure and classify spin has been of great interest to cricket organizations, coaches, and athletes. While video is common, an alternative approach is to use 3D motion capture analysis with reflective spheres, which changes the aerodynamics of the ball. An instrumented cricket ball has proved to be effective in measuring high-speed spin rates using gyroscopes. In this study, an instrumented ball with a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer located at the center mass of the ball was constructed. The spin rate was calculated using the magnetometer, and two spin types (off-spin and leg-spin) were classified. The sensor data was validated using motion capture. In addition, inertial measurement units (IMUs) mounted on the wrist and elbow of a wrist-spin and off-spin bowler were used to verify and validate the spin classification. The magnetometer can be effectively used in conjunction with conventional IMU sensors on the bowler’s arm to tailor training sessions by addressing deficiencies identified in a bowler’s spinning technique and to monitor their performance.
dc.description.peerreviewedYes
dc.languageEnglish
dc.language.isoeng
dc.publisherMultidisciplinary Digital Publishing Institute
dc.relation.ispartofissue1
dc.relation.ispartofjournalProceedings
dc.relation.ispartofvolume49
dc.subject.fieldofresearchEnvironmental Engineering
dc.subject.fieldofresearchcode0907
dc.titleSpin Rate Measurements in Cricket Bowling Using Magnetometers
dc.typeJournal article
dc.type.descriptionC1 - Articles
dcterms.bibliographicCitationKumar, A; Espinosa, HG; Worsey, M; Thiel, DV, Spin Rate Measurements in Cricket Bowling Using Magnetometers, Proceedings, 49 (1)
dcterms.licensehttps://creativecommons.org/licenses/by/4.0/
dc.date.updated2020-06-16T14:17:23Z
dc.description.versionVersion of Record (VoR)
gro.rights.copyright© 2020 The Authors. Licensee MDPI, Basel, Switzerland. This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
gro.hasfulltextFull Text
gro.griffith.authorEspinosa, Hugo G.
gro.griffith.authorThiel, David V.
gro.griffith.authorKumar, Aswath
gro.griffith.authorWorsey, Matthew T.


Files in this item

This item appears in the following Collection(s)

  • Journal articles
    Contains articles published by Griffith authors in scholarly journals.

Show simple item record