Show simple item record

dc.contributor.authorLiu, W.en_US
dc.contributor.authorZhang, H.en_US
dc.contributor.authorHu, Z.en_US
dc.contributor.authorWang, H.en_US
dc.contributor.authorYao, .XD.en_US
dc.date.accessioned2017-04-24T13:19:08Z
dc.date.available2017-04-24T13:19:08Z
dc.date.issued2005en_US
dc.date.modified2011-07-09T02:31:45Z
dc.identifier.issn02555476en_US
dc.identifier.doi10.4028/www.scientific.net/MSF.488-489.211en_AU
dc.identifier.urihttp://hdl.handle.net/10072/39474
dc.description.abstractBulk armorphous Mg65Cu25Gd10 alloy of 12mm rods were prepared by water quenching the molten alloy in the stainless steel tube. Neither cavities nor voids are seen over the whole range and no contrast revealing a crystalline phase is seen over the transverse cross section. The glass transition temperature (T-g), crystallization temperature (T-x), the melting temperature (T-m) and the liquidus temperature (T-l) are measured to be 419K, 492K, 702K, 735K, respectively, for the Mg65Cu25Gd10 alloy with a diameter of 12mm. These temperatures are similar with those of the alloy with a diameter of 8mm produced by metallic mould casting. Both alloys have the same Vickers hardness about 260. Water quenching can further improve the critical diameter of glassy rods, so it is qualified for the formation of the bulk alloys.en_US
dc.description.peerreviewedYesen_US
dc.description.publicationstatusYesen_AU
dc.languageEnglishen_US
dc.language.isoen_AU
dc.publisherTrans Tech Publicationsen_US
dc.publisher.placeSwitzerlanden_US
dc.relation.ispartofstudentpublicationNen_AU
dc.relation.ispartofpagefrom488en_US
dc.relation.ispartofpageto489en_US
dc.relation.ispartofjournalMaterials Science Forumen_US
dc.relation.ispartofvolume211en_US
dc.rights.retentionYen_AU
dc.subject.fieldofresearchSolid State Chemistryen_US
dc.subject.fieldofresearchPhysical Chemistry of Materialsen_US
dc.subject.fieldofresearchcode030206en_US
dc.subject.fieldofresearchcode030304en_US
dc.titleFabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenchingen_US
dc.typeJournal articleen_US
dc.type.descriptionC1 - Peer Reviewed (HERDC)en_US
dc.type.codeC - Journal Articlesen_US
gro.date.issued2005
gro.hasfulltextNo Full Text


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

  • Journal articles
    Contains articles published by Griffith authors in scholarly journals.

Show simple item record