Show simple item record

dc.contributor.authorOrtíz, J
dc.contributor.authorCaicedo, J
dc.contributor.authorNavarro-Devia, J
dc.contributor.authorMartinez, J
dc.contributor.authorAperador, W
dc.date.accessioned2021-01-06T05:03:20Z
dc.date.available2021-01-06T05:03:20Z
dc.date.issued2020
dc.identifier.issn0354-8996
dc.identifier.doi10.24874/ti.924.07.20.11
dc.identifier.urihttp://hdl.handle.net/10072/400721
dc.description.abstractThe industrial tool performance inspires the study of the machining of several materials with low production downtime. Aluminum is well-known for its high strength-to-weight ratio when compare both plastic and raft, thus making it advantageous for aerospace, construction and transport applications. However, aluminum machining damages the cutting tool with diverse wear mechanisms (adhesion, abrasion), thus suggesting a need for a new coating material. Previous studies show a high performance in abrasion resistance of Hafnium nitride [HfN] coated tools in turning of AISI1020 steel. This article evaluates the performance of [HfN] coated and uncoated burins (ASSAB 17) through roughing of Aluminum profiles by temperature sensing at the tool/material interface, workpiece roughness measurement and inspection of the cutting tool wear. Scanning electron microscopy and confocal microscopy were used to identify tool wear. A digital temperature sensing device displaying infrared long-wavelength was designed to examine the temperature due to its correlation on the tool wear. A significant improvement during aluminum roughing was observed with the use of [HfN] coatings, due to increase of the wear resistance of the ASSAB 17 burin, thus improving the surface finish.
dc.description.peerreviewedYes
dc.relation.ispartofpagefrom679
dc.relation.ispartofpageto691
dc.relation.ispartofissue4
dc.relation.ispartofjournalTribology in Industry
dc.relation.ispartofvolume42
dc.subject.fieldofresearchEngineering
dc.subject.fieldofresearchcode40
dc.titleHfn coating of assab 17 steel by pvd method and its effects on 6063-t5 aluminum alloy turning
dc.typeJournal article
dc.type.descriptionC1 - Articles
dcterms.bibliographicCitationOrtíz, J; Caicedo, J; Navarro-Devia, J; Martinez, J; Aperador, W, Hfn coating of assab 17 steel by pvd method and its effects on 6063-t5 aluminum alloy turning, Tribology in Industry, 2020, 42 (4), pp. 679-691
dcterms.licensehttp://creativecommons.org/licenses/by-nc/4.0/
dc.date.updated2021-01-06T00:53:00Z
dc.description.versionVersion of Record (VoR)
gro.rights.copyright© 2020 Published by Faculty of Engineering. This is an Open Access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License, which permits unrestricted, non-commercial use, distribution and reproduction in any medium, providing that the work is properly cited.
gro.hasfulltextFull Text
gro.griffith.authorNavarro Devia, John H.


Files in this item

This item appears in the following Collection(s)

  • Journal articles
    Contains articles published by Griffith authors in scholarly journals.

Show simple item record