A production spar designed for West African (WA) offshore conditions must consider possible resonance with long period swell, which might result in large amplitude heave oscillations. Preliminary study of a classic spar with diameter of 39 m (128 ft) and draft 198 m (650 ft) for a WA application led the authors to believe that excessive heave response of 5.2 m (17 ft) may occur at the natural period of 28 seconds. This led the team to investigate the possibility of adding a heave plate (circular disk) at the base of the spar to control the response to within 3.1 m (10 ft), which is the limit set by a typical compensation system. Important design issues arose with regards to the geometry of the plate, i.e. diameter and thickness. Numerical simulations and model testing were used to identify the influence of a heave plate on the heave response of the spar. Heave response for various diameters and thickness were investigated. Comparison of added mass and damping values were found to be in reasonable agreement. Issues such as effect of a centerwell and moorings, plate cutouts for ease of transportation were also investigated. Discussion of the experimental results and comparison with numerical simulations are presented in this paper, and some recommendations are made on optimum heave plate geometry.